Sometimes the world of CAD terms can be confusing. If you don’t know your planer surfaces from your bezier curves, then we’re here to help!
BricsCAD’s guide to CAD terms
An entity such as text or geometry used to add additional information to a drawing. Objects include BIMTags, revision clouds, and callouts. More information on annotations in BricsCAD.
An object made from components or subassemblies. How to use assemblies in BricsCAD.
A section of a circle. How to use Arcs in BricsCAD.
A series of objects arranged in a rectangular or polar (circular) pattern. Can be 2D or 3D. More information on Arrays.
A dimension that automatically adjusts based on its associated entity(s).
An annotation tag, typically circular, usually containing a number or letter that represents the object’s value in the accompanying text or BOM.
A 2D view projected directly from a 3D model. See command: VIEWBASE.
A technique to remove a sharp corner to create a 45° sloped edge.
A curve defined by 4 points: the beginning and endpoints: anchors, and the middle points: handles.
An image file where each pixel is defined as an RGB color value.
(Building Information Modeling). A process supporting the generation and management of a digital representation of a physical model. See Also: BricsCAD BIM.
An associative tag generated in BIM section drawings. More information on BIMTags.
A collection of objects that are combined into a single object, which can be used multiple times in the same drawing. If the block definition is edited all other copies are automatically updated. More information on blocks.
(Bill of Materials) List and quantity of materials, assemblies, components, parts, etc.
Computer-Aided Design, a term usually applied to the software.
Computer-Aided Design and Drafting.
An annotation typically comprised of a leader line and a balloon.
Computer-Aided Manufacture OR a type of gear used to achieve irregular motion.
The exact center of a circle, arc, equilateral polygon or ellipse.
When the corner between two connected lines is replaced by a short line. See: ‘Fillet’. More information on Chamfer.
A subcomponent of an assembly.
(Computer Numerical Control) Used to automate tools such as mills routers and grinders.
Lines or edges that run parallel to each other.
A single part of an assembly or subassembly.
Limits entities such as to a single point, position, angle or dimension. More information on constraints.
Arcs or circles that share the same center point.
Coordinates / Coordinate System
A set of magnitudes represented as x, y, and z, coordinates that determine the relative positioning of an object within the drawing space.
A given number of surfaces that follow the same planar path.
A 2D, cut-through view of a 3D object.
Illustrates the path of a cross-section.
Typically used to describe the 2D and isometric line drawings created from 3D objects and engineering drawings.
The person responsible for creating drafts.
An open-source files type, closely related to .dwg file type. More information on DXF.
An oval. How to use ellipses in BricsCAD.
2D drawings generated for manufacturing. More information on 2D drafting in BricsCAD.
A given single object in a drawing. Does not include things like textstyle or dictionary items.
Exploded view/Exploded drawing
A 2D visualization of a disassembled assembly. More information on 2D drafting in BricsCAD.
A technique of dragging a 2D dimensional boundary, face or polygon into a 3D object, either along a single axis or with a taper. How to use extrude in BricsCAD.
When the corner between two connected lines is replaced by a rounded arc. See: ‘Chamfer’. How to use fillet in BricsCAD.
Geometric dimensioning and tolerancing. A system for defining engineering tolerances.
In BricsCAD grips display as small colored squares at key-points on selected entities. (The default color is green). More information on grips.
A circular line that travels along the relative z-axis. It can maintain a constant circumference or can taper. Similar to the thread of a screw. How to use helixes in BricsCAD.
(Industry Foundation Classes) An official standard, open file format that is used to specify building data. More information on IFC. More information on IFC.
A view or drawing style where objects appear the same size regardless of their relative position in space. All axes are drawn at an angle of 60°, edges of a straight-sided object are drawn parallel to each other. More information on isometric drawing.
Just Checking You’re Still Reading (not a real CAD term).
A line on a drawing, typically with an arrow, that links an item to a piece of text or a balloon. How to add leader lines to BricsCAD.
A family of computer languages. Affectionately referred to as Lost In Silly Parentheses given the high number of parentheses used in the coding language. Learn how to get started with LISP.
A 3D shape created between 2 or more 2D objects. How to use loft in BricsCAD.
The widest width of an ellipse.
Mechanical Computer-Aided Design
The narrowest width of an ellipse.
The virtual area in which the 3D model resides.
A unique identifier of an entity in the drawing.
The zero ‘starting point’ of an object or block.
Objects placed horizontally or vertically in a drawing. See Ortho Help for Otho Mode.
The area used to create the printing and plotting layout. More information on model space and paper space in BricsCAD.
A higher level assembly part. Sometimes the term “Grandparent” or “Great-Grandparent” is used at high levels.
A set of constraints used to control the size of the geometry. The value can be manually altered and animated in BricsCAD. Learn more about parametrics in BricsCAD.
See – Tool Palette.
A view that mimics the ‘real world view’. Displaying objects as smaller when they are further away. The top and bottom edges of an object are not parallel.
A closed polyline. How to use polygons in BricsCAD.
Two or more, connected lines, curves or arcs. They can be closed or open. How to use polylines in BricsCAD.
A flat area or boundary in any given direction.
A flat surface in any given direction.
Simple drawing objects; a point, line sphere, pyramid, arc, etc.
Various attributes of a given object or objects.
A command to refresh the current drawing references and resolution. How to use regen in BricsCAD.
Coordinates that are relative to the last point entered. Use the @ symbol to enter relative coordinates in BricsCAD.
The panel that is displayed along the top of the workspace, it provides you with quick access to the most frequently used commands.
An image that represents a complex item in a simple way, typically electrical wiring or similar.
Code used to automate a set of commands. See also: LISP and VB.
A line on a 2D view that illustrates a section line. How to use sections in BricsCAD.
A drawing tool to magnetically attach the cursor to a given origin point. Learn about entity snaps in BricsCAD.
The horizontal part of a leader line.
A 3D file type that is read by many CAD software packages.
A 2D shape that is extruded along a line or curve to create a 3D object. How to use the sweep command in BricsCAD.
A line that intersects a circle, ellipse or arc at a given point but does not cross it How to use tangents in BricsCAD.
A section of the workspace containing a collection of command buttons. These can be repositioned. More information on tool palets in BricsCAD.
The structure of an assembly. Used as the assembly typically has a dividing, branch-like structure to it.
(User coordinate system) A user-defined coordinate system. That move the x, y, and z axes within the 3D workspace. More information on user coordinate systems in BricsCAD.
The scale factor of a drawing: what “1” represents. It can be both metric and imperial. More information on units in BricsCAD.
(Visual Basics) A coding language and visual environment that allows coders to quickly generate code.
A point at the junction of a polyline, polygon or vertices.
(World Coordinate system) A fixed coordinate system that differences the location of all entities in a drawing.
Define settings and preferences regarding a specific working environment.
(External Reference) a linked entity that is saved to a file external to the drawing.
Head over to the BricsCAD Help Center. You’ll find plenty more information on CAD terms, tips and lessons.
More Tuesday Tips:
- BricsCAD Trial Versions
- Glossary of CAD terms
- Reduce your work time with The Quad
- Save time with Propagate
- Edit polylines in BricsCAD
- Converting to .dwg
- 11 – ways to draw a square in BricsCAD
- A quick guide to DXF
- Solids, Surfaces, and Meshes
- Callouts, leader lines & balloons
- Automate Technical Drawing
- Orthographic Drawing from a 3D Model in 20 Seconds
- ‘api-ms-win-crt-runtime-dll’ Error while starting BricsCAD
- Everything you need to know about Render Materials in BricsCAD
- Transform 2D Entities with Stretch
- Move, Edit and Change Entities at Hyper Speed with BricsCAD
- The BricsCAD® Hotkey Assistant & Tips Panel